Trumpeter King Tiger Tank 16th Scale Plastic Model Kit

Trumpeter King Tiger (TM00910)
Out of stock
Notify me
Starter Paint Pack 6 X 17ml (VP00910)
Add to basket
Deluxe Materials Plastic Magic Cement (AD83)
Out of stock
Notify me

Trumpeter King Tiger 1/16th Scale

Fantastically large 16th scale plastic tank with hours of building fun to be had. This is a very detailed model kit offering any keen modelling enthusiast a great project.

  • Length: 505mm 
  • Width: 188mm
  • Parts = 1850+ pcs
  • Metal Parts = tow cable, spring,shaft, steel tube , metal pin, etc.
  • Photo Etched Parts = 5pcs
  • 46 sprues ,sprocket wheel , track links, poly cap, upper hull ,lower hull ,turret inner wall, Henschel Turret and Porsche Turret 

Full interior details

  • Interior hull is divided into four compartments, driving, fighting, engine and transmission. The fighting compartment is situated in the middle part of the tank inside the turret. Accurately designed transmission and steering brake.
  • Correctly detailed numerous flexible rubber engine cooling duct. 


  • a 88mm gun designed specifically for Porsche turret.
  • A 88mm gun designed specifically for Henschel's turret.
  • Completely gun cradle for 88mm KwK43 L/71. 
  • Separated curved gun mantlet w/ extreme detail.
  • larger style muzzles provided .
  • The main gun could be auto-reset by the metal spring.

Turret & Fighting Compartment

  • 2x Multi-slide-molded 7.92mm MG w/delicate detail.
  • Slide molded one piece upper turret accurately shaped for ease assembly.
  • Upper turret inner side walls in extreme detail w/separate parts . 
  • Cupola hatch can be assembled open/closed.
  • Loader's hatch can be assembled open/closed with interior metal tube/ actuating rod.
  • Rear turret hatch with cover can be modelled open/ closed.
  • Three different type 88mm ammunitions w/photo-etched parts for bottom detail, total of 72 rounds stored along the hull sides and a fraction of stored in the rear of the turret.  The turret could be traversed 360 degrees.


  • Two-directional slide-moulded hull bottom with suspension assembly holes on both sides
  • Hull inner side walls in extreme detail w/separate parts .
  • Slide-moulded swing arms with torsion bars assembly holes. 
  • Torsion bars and suspension armoured covers come as separate parts.
  • Late type side fenders w/pattern detail on both top and bottom surface.
  • Exhaust pipe w/photo-etched parts for great detail.
  • Metal towing cables.
  • Slide-molded towing eye brackets in extreme detail w/separate parts.

Suspension & Wheels

  • Suspension is made up of nine sets of overlapping 800mm road wheels per side.
  • drive sprocket wheel in Late type with authentic detail.
  • Idler wheel exhibit maximum detail w/separate armoured covers.


  • Wider 800mm combat tracks, 105 links toothed track and 105 links flat track, including the spare tracks, they can be joined by 400 shafts, and accurately lined up and sagged the result of link's weight. Of course are the workable track links, and the material is ABS plastic in burnt iron color, Intricate tank tracks come pre-assembled.
  • Photo-etched engine deck grills and engine grills.

In early October 1942, plans for production of the VK 45.03 were reviewed. Initially two designs were provided, one by Henschel and one by Porsche. Both used a turret design from Krupp; the main differences were in the hull design, transmission and suspension.

The Henschel version used a conventional hull design with sloped Armour resembling the layout of the Panther tank. It had a rear mounted engine and used nine overlapping road wheels per side, mounted on transverse torsion bars, in a similar manner to the original Tiger. To simplify maintenance, however, the wheels were overlapping rather than interleaved as in the Tiger

Henschel won the contract, and all Tiger 2's were produced by the firm. Two turret designs were used in production vehicles. The initial design is sometimes misleadingly called the "Porsche turret" due to the belief that it was designed by Porsche for their prototype. In fact this turret was simply the initial Krupp design for both prototypes. This turret had a rounded front and steeply sloped sides, with a difficult-to-manufacture curved bulge on the turret's left side, to accommodate the commander's cupola. Fifty early turrets were mounted to Henschel's hull and used in action. The more common "production" turret, sometimes called the "Henschel" turret, was simplified with a flat face, no shot trap (created by the curved face of the initial-type turret), less-steeply sloped sides, and no bulge for the commander's cupola.

The track system used on the Tiger II chassis was a unique one, which used alternating "contact shoe" and "connector" links—the contact shoe link had a pair of transverse metal bars that contacted the ground, while the connector links had no contact with the ground.

The Tiger II was developed late in the war and made in relatively small numbers. Like all German tanks, it had a gasoline engine. However, this same engine powered the much lighter Panther and Tiger I tanks. The Tiger II was under-powered, like many other heavy tanks of World War II, and consumed a lot of fuel which was already in short supply.

Starter Paint Pack Includes:

6 x 17ml Vallejo model paints. Vallejo paints are supplied in plastic bottles of 17ml with an eyedropper device which keeps paint from drying and prevents spills. The model color range has been specifically developed for adherence on difficult surfaces such as metal and plastic, but the product is not toxic, not flammable, and does not give off noxious fumes.

Deluxe Materials Plastic Magic Cement 40 ml.

Plastic magic cement is a thin liquid plastic cement with a 10-15 sec adjustment time & non-clog action. It is non-toxic, non-flammable with minimal odour and almost zero emissions when compared to competitors.